This specification defines a set of SCSI commands for setting drive status information, including status for RAID arrays, into a disk drive array enclosure. The drive array enclosure may be a separate enclosure, or the same enclosure. The specification also defines commands for managing hot-swap drive slots and returning environmental health information for a drive enclosure.
![]() SAF-TE: SCSI Accessed Fault Tolerant Enclosures Interface SpecificationIpmi Serial Over Lan Internet
The status commands are typically used by the enclosure manufacturer to assert lights or other indicators that provide information to the user about the state of the drives in the array. This can include statuses such as 'rebuilding,' 'fault,' and 'hot spare.' The SCSI accessed fault tolerant enclosures (SAF-TE) status setting commands are typically issued either by an intelligent disk controller or by software—for example, RAID software—running under the operating system.Other parties on the SCSI bus may elect to access the status information as a means of determining the state of the physical drives in the array.
Igo primo apk cracked. In addition, SAF-TE commands can be used to report certain environmental information about the enclosure, such as temperature, voltage, power supply, and fan health.
While the 04/14/97 revision is marked 'Intermediate Review,' this document is the de-facto and most widely deployed version of the specification and is recommended as the basis for any new implementations. Youtube music free beyonce before i let go.
Ipmi Serial Over Lan Windows 7![]()
Note that a number of enclosure implementations have been based on the 08/27/96 revision of the specification. This version was the original SAF-TE, V1.0, specification plus addenda. These documents, plus documents highlighting the differences against the 04/14/97 version, are included in the SAF-TE Archive Zip* file. It is highly recommended that software and controllers make provision for differences between the versions.
Serial Over LAN (SOL) output from Supermicro's IPMI View. Supermicro IPMI. In addition to these standard features many system vendors build on this base and create a more complete remote management solution. Supermicro for example support the following on almost all of their X8, X9 X10 and X11 based motherboards. Serial over LAN (sol) and Emergency Management Services (EMS) Apart from controlling the systems power state, IPMI also implements serial-over-lan connectivity. This can be used to connect to a remote system’s serial console using an IP connection. Now on Windows servers we do not typically use serial connections, at least not for management. The console view is provided by IPMI Serial-over-Lan (SoL) but requires IPMI v2.0, sometimes called ‘lanplus’. The BMC normally has an embedded web server which is fine for doing power resets, but requires a java-based applet to do SoL. IPMI, v2.0, includes new features such as 'Serial Over LAN' (SOL) for redirecting a baseboard serial port over an IPMI LAN session extended and Remote Management Control Protocol+ (RMCP+) that provides enhanced authentication and confidentiality (encryption) capabilities for IPMI LAN sessions.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |